Combined Sat & TV Analog & Digital QPSK & COFDM Analiser for D.T.H. community
SMATV distribution systems easy and perfect dish alignment, fully automatic
analog/digital TV selection also in TV CH navigation (47-2250 MHz) (30-126 dBìV)
Level Accuracy 1 dB
Easy to use, in channel navigation, automatically selects the analog or
digital TV modulation
Up to 99 navigation memory plans
Real Digital Average Power measurement: from 5–30 to 123 dBuV
Measurements: aBER, bBER, MER, SNR, EVM, NOISE margin, average power
SAT FINDER: Simple to use and automatic highly efficient
Dual LNB dish alignment function
TV AUTOSCAN: Auto–search and auto–memory function
Accurate spectrum analysis with max hold (peak) features, Modulation,
Plan, Program No., Prog. name, Channel, Frequency, selectable and storable
from the keyboard or through PC
Network identification function (network name, orbital position, bouquet,
encryption system and date)
Automatic Quality Analysis: FAIL– MARG–PASS and Noise Margin measurements
USB PC interface for firmware up–grades through internet
ONLY: £469
€799
Horizon digital satellite meter
HDSM Horizon Digital SATELLITE Meter
Our Digital Satellite Meter (HDSMV2.5) is for the easy
alignment of satellite dishes. Battery driven the meter finds a satellite,
chosen from the menu. 32 transponders or 16 satellites can be stored at any
time.
From a set up menu the following features can be
customised on the display, signal strength in numerical or dBuV, BER in %
Terms or numerical, carrier noise in dB, True BER after install, graph or
Logarithmic.
The satellite data is upgradeable from downloaded HEX
files via our web site taking around 30 seconds to update, this feature is
very useful for specialist applications like broadband or Vsat
installations.
Different languages are available for the display with
up to four languages being stored at any one time
The meter comes as a kit with car charger, mains charger and computer
interface lead along with a leather case.
Specifics:
• Signal Strength and BER displayed together
• 32 Transponders or 16 satellites, horizontal & vertical
• Audible tune-in, with back light
• DVB, C&Ku band, Mpeg, V Sat compatible
• Input dynamic range -65dBm~-25dBm
• Input connector F-female. Input imp 75 ohms
• Symbol Frequency rate from 1 Msps~45Msps
• Universal charger 100 V ~ 240 V Ac/ 12 W. Intelligent Charger (CE
approved) with delta V delta T detection Fast charge, then Trickle
• Run time with full charge (single LNB): Minimum 3 hours from 2.4Ah NiMH
battery
• Figure of 8 mains input connector. 2.1 mm Female PSU plug for external
charge via supplied car charger
• LNB short circuit protection 500 mA automatic limiter
• RF input range 950- 2150 MHz
• Computer interface: Serial Port (COM 1,2,3 or 4) for
• Upgradeable software on satellite settings.
• RF level can be displayed in dBuV (accurate to +-1dB) or linear scale
(256 steps). Feature available in set up mode
• C/N (carrier noise) is displayed in dB.
• Quality (Pre B.E.R or bit error rate) is locking on faster making it
easier to lock on to the satellite initially typical lock in less than 100
mS.
• Instead of “found” to indicate lock of correct satellites actual B.E.R
can be displayed. Feature available in set up mode.
• The quality (Pre B.E.R) bar graph can be logarithmic rather than liner.
Making it easier to peak the dish and helps with weak satellites. Feature
available in set-up mode.
• Diseqc switch commands available in submenu.
Send mail to sales@satcy.comwith
questions or comments about this web site.
Last modified:
Monday, 25. August 2008!!!
